Current courses

On this page you'll find all courses that are created in LTH's system for postgraduate education courses, and which have occasions created in Ladok, i.e. courses that are current the selected semester. For current and upcoming semesters, occations are created continuously and after creation in Ladok (with status complete) the course appears in the list.

The links for the syllabi below opens in fukurser.lth.se 



Faculty-wide PhD Courses (CEE)

Code Name Current occasions
GEM002F Introduction to Teaching and Learning in Higher Education (5.0 ECTS) 2019-03-18 –
2019-04-29

2019-05-13 –
2019-06-17

GEM006F Communicating Science (5.0 ECTS) 2019-03-08 –
2019-05-27

GEM012F Project Management in Research and Development Projects (5.0 ECTS) 2019-03-20 –
2019-05-29

GEM025F Technology, Risk and Research Ethics (4.5 ECTS)
Application information: Information and application here http://www.lth.se/omlth/kompetensutveckling/faculty_wide_phd_courses/?L=0%252
Contact: Linus Broström
The course is usually given each spring term.
2019-02-07 –
2019-04-12

GEM045F Scientific Information Management (3.0 ECTS) 2019-02-28 –
2019-05-08

GEM056F Introductory Workshop for Newly Admitted PhD Students at Faculty of Engineering at Lund University (2.0 ECTS) 2019-05-10 –
2019-05-27

GEM060F Reading Skills and the Discourse of the Research Article (3.0 ECTS) 2019-01-16 –
2019-04-03

GEM065F Academic Writing for Publication in the Engineering and Science Disciplines (6.0 ECTS)
Application information: Information and application here http://www.lth.se/english/staff/teaching-and-research/phd-studies/phd-courses/faculty-wide-phd-courses/
Contact: Lene Nordrum
The course is usually given each spring term.
2019-01-23 –
2019-06-06

2019-02-07 –
2019-05-10

2019-02-15 –
2019-05-22

Architecture and Built Environment

Code Name Current occasions
AAM005F Environmental Psychology Research - Study Design and Methods (7.5 ECTS)
Contact: Eja Pedersen
The course is usually given on demand.
2019-01-01 –
2019-06-30

Automatic Control

Code Name Current occasions
FRT015F Convex Optimization with Applications (7.5 ECTS) 2019-01-01 –
2019-06-30

FRT175F Lab Development in Automatic Control (7.5 ECTS) 2019-01-01 –
2019-06-30

FRT205F Study Circle in Reinforcement Learning (5.0 ECTS) 2019-01-01 –
2019-06-30

2019-02-01 –
2019-06-30

FRT210F Project in Reinforcement Learning (3.0 ECTS) 2019-01-01 –
2019-06-30

FRTN15F Predictive Control (7.5 ECTS)
Application information: Contact Rolf Johansson, rolf.johansson@control.lth.se
Contact: Rolf Johansson
The course is usually given each spring term.
2019-01-01 –
2019-06-30

2019-02-11 –
2019-06-30

Biomedical Engineering

Code Name Current occasions
BMEN01F Biomedical Signal Processing (7.5 ECTS)
Application information: Apply by email to Course Coordinator
Contact: Leif Sörnmo
The course is usually given each spring term.
2019-03-25 –
2019-06-09

EEMN15F Ultrasound Physics and Technology (7.5 ECTS)
Application information: Apply by email to Course Coordinator
Contact: Maria Evertsson, Monica Almqvist
The course is usually given each spring term.
2019-01-01 –
2019-03-24

EEMN26F Lab-on-a-chip in Biomedical Applcations (7.5 ECTS)
Application information: Apply by email to Course Coordinator
Contact: Thomas Laurell
The course is usually given each spring term.
2019-03-25 –
2019-06-09

EIEN25F Power Electronics - Devices, Converters, Control and Applications (15.0 ECTS)
Contact: Mats Alaküla
The course is usually given each spring term.
2019-01-01 –
2019-06-30

Centre for Mathematical Sciences

Code Name Current occasions
FMA022F Introduction to Partial Differential Equations (7.5 ECTS) 2019-01-21 –
2019-05-29

FMA091F Discrete Mathematics (7.5 ECTS) 2019-03-25 –
2019-05-29

FMA201F Calculus of Variations (7.5 ECTS) 2019-01-21 –
2019-06-09

FMA271F Computer Vision (7.5 ECTS) 2019-01-21 –
2019-03-13

FMA271F Computer Vision (7.5 ECTS) 2019-06-10 –
2019-07-14

FMAN10F Algebraic Structures (7.5 ECTS) 2019-01-21 –
2019-03-13

FMAN15F Non-linear Dynamical Systems (7.5 ECTS) 2019-01-21 –
2019-06-09

FMAN45F Introduction to Machine Learning (7.5 ECTS) 2019-03-25 –
2019-06-09

FMNN05F Simulation Tools (7.5 ECTS) 2019-01-21 –
2019-03-13

FMS092F Monte Carlo Methods for Statistical Inference (7.5 ECTS)
Contact: Magnus Wiktorsson
The course is usually given each spring term.
2019-01-21 –
2019-06-09

MATM16F Topology (7.5 ECTS) 2019-03-25 –
2019-05-29

MATP22F Complex Analysis in Several Variables (7.5 ECTS) 2019-03-25 –
2019-06-09

NUMA01F Computational Programming with Python (7.5 ECTS) 2019-03-25 –
2019-05-29

Chemical Engineering

Code Name Current occasions
KET095F Industrial Biorefineries (7.5 ECTS)
Application information: Send e-mail to gunnar.liden@chemeng.lth.se or Ola.wallberg@chemeng.lth.se
Contact: Ola Wallberg, Gunnar Lidén
The course is usually given every other spring.
2019-01-21 –
2019-06-09

KET105F Catalysis (2.0 ECTS) 2019-01-21 –
2019-06-09

VVAN20F Advanced Wastewater Treatment (7.5 ECTS) 2019-01-01 –
2019-06-30

Computer Science (LTH)

Code Name Current occasions
EDA040F Software Engineering and Cloud Computing (6.0 ECTS) 2019-02-04 –
2019-06-04

EDA050F Web Programming (7.5 ECTS) 2019-01-01 –
2019-06-30

EDAF70F Applied Artificial Intelligence (7.5 ECTS) 2019-01-21 –
2019-03-24

Department of Chemistry

Code Name Current occasions
KAS001F Environmental Issues and Hazards in the Chemical Research Laboratory (2.0 ECTS) 2019-01-01 –
2019-06-30

KASN20F Polymer Physics (7.5 ECTS) 2019-01-01 –
2019-06-30

KBT015F Bioorganic Synthesis (7.5 ECTS)
Application information: Sign up by e-mail to Patrick Adlercreutz
Further information: For further information, contact Patrick Adlercreutz
Contact: Patrick Adlercreutz
The course is usually given on demand.
2019-03-18 –
2019-09-30

2019-03-18 –
2019-09-30

KFKN01F Magnetic Resonance - Spectroscopy and Imaging (7.5 ECTS)
Application information: Please contact course coordinator Mikael Akke
Further information: The course is identical to KFKN01 (LTH) and KEMM17 (faculty of Science) but can be adjusted slightly to the demands of the students. The course provides the fundamental theoretic and experimental aspects of NMR and MR imaging and gives the opportunity for deeper insight into a topic chosen by the student.
Contact: Daniel Topgaard, Mikael Akke
The course is usually given each spring term.
2019-01-21 –
2019-06-09

2019-01-21 –
2019-03-24

KFKN10F Biophysical Chemistry (7.5 ECTS)
Application information: Send an e-mail to the course coordinator
Contact: Kristofer Modig
The course is usually given each autumn term.
2019-01-01 –
2019-06-30

Department of Design Sciences

Code Name Current occasions
IDE020F Introduction to PhD studies at the Department of Design Sciences (4.0 ECTS) 2019-01-01 –
2019-06-30

IDE020F Introduction to PhD studies at the Department of Design Sciences (4.0 ECTS) 2019-06-30 –
2019-12-31

IDE035F The Designer/Engineer and Sustainable Development (7.5 ECTS) 2019-01-01 –
2019-06-30

IDE045F Research Seminars in Design and Innovation (7.5 ECTS)
Further information: The classic seminars will take place on the 2nd Wednesday on the month. The on-going seminars will take place in-between, hence on the 4th Wednesday on the month. Each seminar will last for 1 hour, at 13:00-14:00. Place for the event will be announced later. Schedule for Year 2018/2019: Wed 12/9 Classic seminar Wed 26/9 On-going research seminar Wed 10/10 Classic seminar Wed 24/10 On-going research seminar Wed 14/11 Classic seminar Wed 28/11 On-going research seminar Wed 12/12 Classic seminar Wed 16/1 Classic seminar Wed 30/1 On-going research seminar Wed 13/2 Classic seminar Wed 27/2 On-going research seminar Wed 13/3 Classic seminar Wed 27/3 On-going research seminar Wed 10/4 Classic seminar Five weeks after last seminar is the latest time for submitting the reflective essay, Wed 15/5 2019.
Contact: Lars Bengtsson, Elin Olander
The course is usually given on demand.
2019-01-01 –
2019-12-31

IDE055F Sustainable Development – a Systems View (5.0 ECTS) 2019-01-01 –
2019-07-31

INT001F Innovation and Value Creation in Research (4.0 ECTS) 2019-01-01 –
2019-06-30

MAM010F Reading Course in Aerosol Science (7.5 ECTS)
Application information: Contact: jakob.londahl@design.lth.se
Contact: Jakob Löndahl
The course is usually given on demand.
2019-01-01 –
2019-12-31

MAM025F Seminar Course in Aerosol Technology (5.0 ECTS)
Application information: Contact: jakob.londahl@design.lth.se
Contact: Jakob Löndahl
The course is usually given once each term.
2019-01-01 –
2019-12-31

MAM030F Nanosafety (5.0 ECTS)
Contact: Christina Isaxon
The course is usually given on demand.
2019-01-01 –
2019-12-31

MAM242F Aerosol Technology (7.5 ECTS)
Application information: Request for registration, signed by the PhD student's supervisor, should be sent to the course coordinator ("kursansvarig") by e-mail or by ordinary mail.
Contact: Christina Isaxon
The course is usually given once each term.
2019-01-01 –
2019-12-31

MAM242F Aerosol Technology (7.5 ECTS)
Application information: Request for registration, signed by the PhD student's supervisor, should be sent to the course coordinator ("kursansvarig") by e-mail or by ordinary mail.
Contact: Christina Isaxon
The course is usually given once each term.
2019-01-01 –
2019-06-30

Department of Machine Technology

Code Name Current occasions
MMTN01F Project - Production and Materials Engineering (7.5 ECTS) 2019-01-21 –
2019-06-09

Department of Physics

Code Name Current occasions
FAF015F Quantum Information (7.5 ECTS) 2019-03-25 –
2019-06-07

FAFN05F Light - Matter Interaction (7.5 ECTS) 2019-01-21 –
2019-03-22

FAFN10F Advanced Optics and Lasers (7.5 ECTS) 2019-03-25 –
2019-06-09

FAFN15F Crystal Growth and Semiconductor Epitaxy (7.5 ECTS) 2019-01-21 –
2019-03-24

FBR001F Fundamental Combustion (7.5 ECTS) 2019-01-21 –
2019-06-09

FBR002F Laser-Based Combustion Diagnostics (7.5 ECTS) 2019-01-21 –
2019-06-30

FFFN25F Optoelectronics and Optical Communication (7.5 ECTS) 2019-01-01 –
2019-03-22

FKF030F First Steps in Biosphere-Atmosphere Modelling (5.0 ECTS) 2019-06-10 –
2019-08-31

Electrical and Information Technology

Code Name Current occasions
EDIN05F Mathematical Cryptology (7.5 ECTS) 2019-01-01 –
2019-03-24

EIT046F Queuing Theory (7.5 ECTS) 2019-01-01 –
2019-06-30

EIT060F Estimation Theory (9.0 ECTS) 2019-01-01 –
2019-06-30

2019-02-25 –
2019-06-30

EIT060F Estimation Theory (9.0 ECTS) 2019-02-01 –
2019-06-19

EITN75F Wireless System Design Principles (7.5 ECTS) 2019-03-25 –
2019-06-09

EITN80F Electrodynamics (7.5 ECTS) 2019-03-25 –
2019-06-09

EITP01F High Speed Devices (7.5 ECTS) 2019-01-21 –
2019-03-24

EITP05F Nanoelectronics (7.5 ECTS) 2019-03-25 –
2019-06-09

ETIN30F Integrated Radio Electronics (7.5 ECTS) 2019-01-21 –
2019-03-24

ETIN45F DSP-design (7.5 ECTS) 2019-01-21 –
2019-03-24

ETIN55F Integrated AD and DA Converters (7.5 ECTS) 2019-02-01 –
2019-05-31

ETSN10F Network Architecture and Performance (7.5 ECTS) 2019-01-21 –
2019-03-24

Immunotechnology

Code Name Current occasions
KIM015F Proteomics 1 (15.0 ECTS) 2019-01-01 –
2019-06-30

2019-01-21 –
2019-06-09

KIM020F Advanced Biological Mass Spectrometry (15.0 ECTS) 2019-01-21 –
2019-06-09

2019-01-21 –
2019-06-09

KIM070F Oncoimmunology (7.5 ECTS)
Contact: Christina Sakellariou, Malin Lindstedt
The course is usually given on demand.
2019-01-01 –
2019-06-30

Industrial Management and Logistics

Code Name Current occasions
MTT055F Reviewing for Journals (5.0 ECTS)
Application information: Send an e-mail to jan.olhager@tlog.lth.se
Contact: Jan Olhager
The course is usually given on demand.
2019-01-01 –
2019-06-30

Archive course syllabi

Page Manager: FUD_support@lth.lu.se | 2020-08-28